Solving little art quilting problems are different from the fixing bed quilts issues. One does not have to match seams like when making traditional quilts. If I have an error I can just cut it off with my rotary blade rather than ripping out seams. I still use my seam ripper but just not as much. This is not to say that issues don’t come up. They are just different issues. Some of these solutions apply to sewing in general as well as art quilting.
Solve Basic Sewing Problem
Anticipating Issues with Good Habits
Some suggestions to solve little art quilting problems begin with good habits. Of course the best way to fix problems is to anticipate them before they happen. Always make sure your fabric edge is straight. It might look straight but line up the plastic cutting ruler edge anyway. Make sure the fabric edge is straight. Even fabric straight from a shop might not be cut straight. Advice from construction workers, Measure twice to cut once.
Keep your machine free of dust.
Use a pipe cleaner to keep your machine’s mechanism free of dust. Look for holes in the machine for the pipe cleaner to enter safely.Remove dust carefully. Be careful not to disrupt interior settings. Vacuum the interior monthly if you sew a lot. It is amazing how much lint thread may shed. Remove lint from between the grooves of your feed dogs. I have been known to remove the lint with a large pin. A clean machine makes perfect stitches. Once I took my Husquvarna Lily into the shop because the zigzag stitch wasn’t working. The stitch was fine but my machine was full of lint underneath.
Watch your Speed.
Aim to maintain the same speed as you sew. The speed of throttle affects your stitches. Going fast and then slow can create inconsistent stitches. Attempt to keep a steady speed when stitching. Listen to your machine. It will tell you when your speed is changing. Especially on mindless tasks, we tend to daydream and not pay attention to the speed that we are pushing on the pedal or throttle.
Trouble Threading the Needle
If you are having trouble seeing to thread the needle on the machine,here is an easy fix. Get a white piece of paper. Double thickness or paper that is a bit stiff helps. Place it behind the needle and hold it there while threading the needle. The white makes a clearer background to see the needle’s hole. Other tips-Please wear your glasses. Trim the edge of thread before threading. Wet the end of the thread with saliva so the end isn’t frayed. I personally have not had luck with needle threaders. Maybe they will work for you.
Thread Trimming
Did you know that you can use 1 side of the scissors to trim a thread,sort of like a knife. This especially is helpful when the thread is coming out of the fabric.Trim as close as you can to the fabric with just one blade of the scissors. If you trim normally with the 2 points of the scissors coming together, one can accidently snip the fabric. This small nip in the fabric is difficult to fix. Some of us learn things the hard way.
Some Suggestions to Solve Little Art Quilting Problems.
Tucks to the Rescue
Tucks to the rescue. Sometimes a piece of fabric is just a bit too big for where it needs to fit. Yes, you could just cut off a piece of the fabric. But why not try to turn a problem into a solution. Create more texture for your art quilt by making one or more tucks . This may be useful when one is working within a particular size requirement. Tucks can be different sizes. They can be sewn close to the edge of fold or 1/4th inch (1cm) or farther away. Make a tuck or two that runs the whole length of the piece of fabric. I discovered the power of tucks when the slightest bit of extra fabric was too much.
Use the Crease or Fold to your Creative Advantage.
I often repurpose materials. Sometimes a piece of fabric comes with a crease or fold. It can be difficult to remove the crease even after using spray starch. Try this solution. Use the crease or fold to your advantage. Create a tuck or several rows of tucks. Sew the stitching line as close as you can to the edge of the fold. Problem solved. While creating an original art quilt, use the fold to your advantage. A series of folds can be moved to one side or the other to create movement as well as texture.
A variation- Sew several lines of folds. Remember the rule of three or odd numbers. You may sew the tucks 1/4″ (1 cm) away from the fold. To create movement and texture, iron the segments of the tucks in different directions.
Solve little Art Quilting Problems by Thinking Before you Cut
Think how can I save time or effort while cutting this fabric. I add a lot of foliage to my nature art quilt pieces. I started out cutting individual pieces. By accident I discovered that while cutting one piece, I could create a second piece that would be a mirror image. Less fabric would be lost. Just don’t cut all of the way through to the far end. Stop at the top of what you are cutting. Turn the fabric around and continue down the other side instead of cutting all of the way to the opposite side. Not difficult do if you stop and think before cutting. Just another way to solve little art quilting problem.
This technique could create mountains, foliage or another running pattern.
Sometimes experienced quilters forget about all of the little tips that they have learned along the way. I try and point a few hints here that I have learned.These are just a few of different technical problems or creative issues one might encounter.
https://annbaldwinmayartquilts.com/2023/04/what-most-people-dont-know-about-art-quilting/
